Featured Post

[Latest] MIUI 9 Beta 7.10.12 Rom For Huawei Honor Holly | Hol-U19 | Honor 3C Lite MIUI (which stands for Mi  user  Interface and  p...

Continue reading

Saturday, November 4, 2017

[MT6582][3.4.67] XOSP Android Nougat Rom For Huawei Honor Holly 3C Lite | Hol-U19



[MT6582][3.4.67]  XOSP Android Nougat Rom For Huawei Honor Holly 3C Lite | Hol-U19


XOSP is an after-marketplace firmware primarily based on CodeAuroraSources (CAF) destinated for a extensive range of Android phones. The name stands for the Xperia Open source mission and the assignment become first of all created through @nilac for the Galaxy S+ (his antique tool) years in the past when lower back then the ROM turned into referred to as S+ Reborn. The imaginative and prescient turned into to create a minimum bloat loose ROM which protected Sony Xperia unique apps and numerous tweaks customers would count on from a custom ROM.S+ Reborn became a achievement and become ultimately ported to different devices so from there it changed into rebranded to XOSP. Calin worked on the task for two years continually trying to enhance it. in the end, due to the truth Lollipop was buggy on his Galaxy S+, he determined to take a break from development until he were given his arms on the Zenfone 2 in 2015 and from then he started once more the development of XOSP and continued it ever due to the fact.



What's working:-




  • WiFi
  • HP
  • BT fixed
  • Cam
  • Rec
  • Baseband fixed
  • Data fixed
  • Ril (sim1 call)
  • GPS fixed
  • Fixed green Live video on social media
  • Mic fixed
  • Audio in speakers
  • MTP crash fixed
  • Offline charging
  • And much more...









  • Vpn


























  • Wasim Raja ( porting for holly u19)
  • Anand Umap (For Crossporting and fixing bugs) 
  • Aditya Kumar :- The man behind los13/14 for mt6572
  • TribetMen :- Legend who bring out 2g/3g fix and N patches
  • Ferhung :- man behind cm12/13 for mt6582
  • Fire855 :- man behind cm12/13 for mt6592
  • Hiperiun
  • Nana






  • Guide to Flash This ROM with TWRP Recovery






  1. Boot into Recovery Mode & choose "Wipe"
  2. Now Choose "Advance Wipe" & Tick "Dalivk/Art cache", "Cache", "System" & "Data"
  3. Now Slide "Swipe to wipe" & Go back to Main Page
  4. Now Choose "Install Zip" & Locate and select Your "Rom & GApps"
  5. Now Slide "Swipe To Confirm Flash" to flash the ROM & GApps
  6. Now Select "Wipe Cache/Dalvik" and swipe to clear it...
  7. Now Press "Reboot System" & Enjoy 😄😎😎









  • Guide to Flash This ROM with Philz Recovery






  1. Boot into Recovery Mode & choose "Wipe and Format Option"
  2. Now Choose "Clean to Install A New ROM" & Go back to Main Page
  3. Now Choose "Install Zip" and Select Your "Rom" from "SDCard" or "SDcard1"
  4. Confirm "Yes To Install" & Go back to Main Page
  5. Now Again Choose "Wipe and Format Option"
  6. Now Choose "Wipe Cache" & "Wipe Dalivk/Art cache"
  7. Confirm "Yes To Wipe" & Go back To Main Page
  8. Now "Reboot System Now" & Enjoy 😄😎😎





Tuesday, October 3, 2017

How to Enable ZRam / Swap in Any Android Rom Default in Boot.img



How to Enable ZRam / Swap in Any Android Rom Default in Boot.img


Hi guys..Today I will guide You How to enable Zram/Swap in any rom default in boot.img

What Is Zram/Swap??

zram is a Linux kernel function that gives a form of virtual memory compression. zram increases overall performance by way of keeping off paging to disk and the usage of a compressed block device in RAM instead, inside which paging takes area until it is essential to apply the swap area on a hard disk drive. since using zram is an alternative way to provide swapping on RAM, zram allows Linux to make a better use of RAM when swapping/paging is needed, specifically on older Devices with much less RAM installed


Rquirement

1. PC
2. Knowledge about unpacking and repacking boot.img
3. Notepad++
4. a working brain

Let's Start

1. download these 4 tiny*** files (Click Here) and Extract it
you will get following 4 files listed below

a. tiny_mkswap
b. tiny_swapoff
c. tiny_swapon
d. tiny_switch

Now Copy these files
Extract the Rom(in which do you want to enable swap or zram)
Now go to System - Bin folder and paste those four files here (all tiny** files)


2. Unpack the boot.img and go to initrd or Ramdisk folder

and see is there any enableswap.sh file?
if yes then no need to do or edit anything in boot.img

If no, Download this zip file (Click Here).. You will see these two following files listed Below


a. enableswap.sh
b. swap line.txt

Now copy enableswap.sh and paste in initrd or ramdisk folder..

Now open swap line.txt and press CTRL + A and copy all Lines

1. If your rom is Kitkat (4.4.x)

open init.rc (in ramdisk or initrd folder) with Notepad++
and paste in bottom.. and Save it
Repack the boot.img and replace it with your existing boot.img..zip the Rom And Flash it

2. If your Rom is Lollipop (5.x)

open init.mt6582.rc (in ramdisk or initrd folder) with Notepad++
and paste in bottom.. and Save it
Repack the boot.img and replace it with your existing boot.img..zip the Rom And Flash it

3. your rom is Marshmallow or Nougat (6.0.x or 7.x)

open init.mt6582_common.rc (in ramdisk or initrd folder) with Notepad++
and paste in bottom.. and Save it ( if init.mt6582_common.rc is not available.. Paste it in init.mt6582.rc)
Repack the boot.img and replace it with your existing boot.img..zip the Rom And Flash it



Note:- Using This Guide You can enable only 512MB ZRam



  • If you have any queries  about this guide, comment down.. I will try to help as soon as possible
  • ATTENTION! For all the actions with your phone, the administration of the site is not responsible! All the operations you do at your own risk!

Click Me

Popular Posts

Widget by :Wasim Raja